Australian Located, Owned & Operated

Just added to your cart

Pipe Identification Marker

Qty: 1
Checkout Continue Shopping
Made in Australia 🇦🇺

Pipe Identification Marker

Printed pipe, conduit or duct contents marker in the AS 1345 colour scheme, with editable contents text and flow-direction chevrons — default water (white on green)

Default 450 x 80 mm pipe marker: WATER in white on a green block with green flow chevrons in a white border. Reword and recolour in the designer for other services.

4.9 (230+ reviews)

Ships in 3–5 business days

Identify the contents and flow direction of pipes, conduits and ducts in plant rooms, ceiling spaces and services risers. The default marker is water — white lettering on a green colour block with green flow chevrons in a white border — in the AS 1345 colour scheme. Every element is editable: change WATER to CHILLED WATER, HEATING WATER, STORMWATER or your own legend, or recolour the block and chevrons for another service (for natural gas, compressed air, recycled water and fire services see our dedicated pipe markers).

AS 1345 sets a colour family for each contents group: water green, steam silver-grey, oils and flammable liquids brown, gases yellow-ochre, acids and alkalis violet, air light blue, other liquids black, fire services red, electric power orange and communications white. White lettering is used on green, brown, red, violet, light blue, orange and black, with chevrons in the base colour; black lettering and black chevrons are used on silver-grey, white and yellow-ochre. Recycled or non-drinking water follows AS/NZS 3500.1 (purple range), not the AS 1345 green. Where drinking water could be contaminated by an adjacent service, AS 1345 also calls for a dark-blue supplementary band at least 75 mm wide alongside the marker; it is not drawn on the default.

Pipe size and placement. The default 450 x 80 mm marker (375 mm colour block, 27 mm capital letters) is sized for services over 75 mm outside diameter, where AS 1345 calls for a background patch at least 50 mm high, letters at least 24 mm high and a patch at least 375 mm long. For 40–75 mm services the standard minimums are a 25 mm patch and 12 mm letters, and pipes under 40 mm use a continuous colour band with letters of at least 4 mm — resize in the designer to suit. Fix the marker along the pipe axis where it can be read from the normal viewing position, next to junctions, valves, service appliances, bulkheads and wall penetrations, and at intervals of no more than 8 m along the run (up to 50 m on uninterrupted, fully visible external runs). The two chevrons show flow in both directions; delete one chevron, or flip it, so the remaining chevron points the way the contents flow.

Colours shown are screen approximations of the AS 2700 references named above, not laboratory-matched colours. Lettering is Oswald bold capitals (AS 1345 recommends AS 1744 Series C or D letters). Confirm colours, wording and sizes against AS 1345 and your project specification before installation. No compliance claim is made for the finished marker.

Also in

What our customers say

View all reviews
5.0

“Outstanding quality and fast turnaround. The labels look professional and have held up perfectly in harsh outdoor conditions.”

Michael T.
Electrical Contractor
5.0

“LOVE the simplicity and efficiency of the website. Online ordering was fast and hassle free.”

Paul F.
Maintenance Manager
5.0

“Super fast and flexible service. Custom labels that look great, delivered quickly and cost effectively.”

Daniel L.
Solar Installer
Valve identification tags, plus the pipe identification marker and its service variants.
Battery, solar, switchboard, arc flash, equipment, and valve labels and signs.